Suppliers with verified business licenses
Audited Supplier | 1,Processing capacity |
Swing over bed mm | φ900 | |
| Max. turning dia.(shaft / disc)mm | φ6000/φ800 | ||
| Max.turning length mm | 2000mm | ||
| 2,Chuck | Chuck size | 15″ | |
| 3,Spindle | Spindle head type | ISOA2-11 | |
| Spindle speed r/min | 20~1500 | ||
| Diameter of spindle front bearingmm | φ170 | ||
| Spindle bore mm | φ132 | ||
| Bar dia. through spindle mm | φ80(When using hollow chuck and hollow cylinder) | ||
| 4,Feeding driver | Fast moving speed m/min | X-axis 12 Z-axis 16 | |
| Feeding rate mm/min | 0~5000 | ||
| max. travel of X/Z mm | X-axis 375 Z aixs 2030 | ||
| 5,accuracy standard | Radial Runout Accuracy of Spindle Short Cone: | Qualified products | 0.012mm |
| Positioning accuracy : | Qualified products | (X)0.022mm (Z)0.032/0.042/0.042/0.050mm | |
| Repeatability accuracy : | Qualified products | (X)0.006mm (Z)0.010/0.013/0.013/0.020mm | |
| Positive and Contrastive Differences: | Qualified products | (X)0.01mm (Z)0.012mm | |
| 6,Spindle rotation system |
Spindle power kw | 22/30 | |
| Spindle TorqueNm | 824/1123 | ||
| 7,Feeding system | Torque of AC Servo Motor | X/Z axis 22Nm/30Nm | |
| 8,Turret | Tool ATC | 12tools | |
| ATC type | According to the shortest path, any tool change, hydraulic motor drive | ||
| Time of tools changing (near /farthest ) | 0.45s/2.2s | ||
| Tool size | 32mm×25mm | ||
| Inner hole tool size | Max.φ50 mm | ||
| 9,Hydraulic tailstock | Max. travel mm | 1838 | |
| Quill dia. mm | φ160 | ||
| Quill travel mm | 180 | ||
| Quill thrust N | 21000 | ||
| Quill taper | MT. NO.5 | ||
| 10,Machine Tool Structure | Design and manufacture of machine tools conform to ISO international standards | ||
| All parts and measuring units of machine tools conform to SI standard. | |||
| X/Z axis guide type :slide | |||
| X/Z axis lead-screw type:Ball screw | |||
| 11,Machine Tool Protection |
Safety, Completeness and Reliability of Machine Tool Protection Device | ||
| Cooling of electronic control cabinet adopts cold and heat exchanger to cool down, seal and dust-proof, protection grade IP54 | |||
| 12,Lubrication system |
Mandatory lubrication of sliding surfaces and ball screw with automatic centralized lubrication device | ||
| Machine display alarm when oil level is too low (oil shortage) | |||
| Lubricating oil | T68# Guide rail lubricant | ||
| Lubrication box volumeL | 1.8 | ||
| Lubrication motor power W | 4 | ||
| 13,Cooling system |
Cooling Tank Volume L | 600/600/700/850 | |
| Wallace Cooling Pump W | Motor power 400 | ||
| Cutter tower cooling pipe is built-in type | |||
| 14,Hydraulic system | Hydraulic station is equipped with heat dissipation device, which can ensure continuous operation of machine tool for 24 hours | ||
| Fuel tank volume L | 70 | ||
| Hydraulic oil grade | 32# Anti-wear Hydraulic Oil | ||
| Motor Power of Hydraulic Pump KW | 3.75 | ||
| Max. pressure bar | 50 | ||
| 15,electrical system | |||
| The system has perfect and reliable interlocking, safety protection, fault diagnosis and alarm functions. | |||
| Equipped with RS232 and embedded Ethernet communication interface | |||
| Controller system | FANUC 0i- -TF(1) | ||
| 17,Chip removal device | Chip type | Chain Plate Chip Remover and Iron Chip Handler | |
| Installation location | Side row | ||
| 21,Overall size and weight | L*W*H mm | 7552×2340×2457 | |
| Machine weight kg | 13000KG | ||
| 22 Packing size | L*W*H mm | 7460×2520×2785 |
|
| 23,Controller system and driver motor |
Controller system | FANUC 0i -TF(1) | |
| Spindle motor | αiIP 50 (22/30 kW) | ||
| X/Z driver motor | αiF 22B/ αiF 30 (22/30Nm) |
||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}